🔧 Price Builder
Plumbing Repairs Price Builder
Select the repairs you need — real certified prices update live as you build your scope
ISO Certified
Licensed & Insured
4.9★ · 230+ Reviews
Get a real estimate for your plumbing repairs before calling a tradie. Every price is sourced from the NSW government Schedule of Rates — transparent, defensible pricing.
Build Your Plumbing Repair Quote
Select the repairs you need — live pricing from certified rates
Quick start — select a package or build your own:
Replace Tap Washer / Seat
Stop dripping tap — single tap
SOR: APP-GCT-RPL-18 ref
$88.73
Each
Replace Tap Strainer
Aerator or strainer replacement, single tap
SOR: PLB-TAP-STR
$35.00
Each
Tap Reseating
Reseat worn valve seat to stop drip
SOR: PLB-TAP-RST
$95.00
Each
Washer + O-Ring Set
Full washer and O-ring replacement, single tap
SOR: APP-GCT-RPL-18 ref
$88.73
Each
Tap Body Replacement
Replace entire tap body, single tap
SOR: BTH-TAP-RPL
$145.00
Each
Replace Basin Tap Set
Supply & install pair basin taps, chrome
SOR: BTH-TAP-RPL
$145.00
Each
Replace Kitchen Tap
Single or mixer tap, chrome finish
SOR: KTC-TAP-RPL
$155.00
Each
Replace Shower Head & Arm
Chrome, WELS 3-star minimum
SOR: BTH-SHW-RPL
$115.00
Each
Replace Flexible Hose
300mm–500mm braided stainless, each
SOR: APP-GCT-SIN-6
$44.58
Each
Drainage Inspection + Report
Full inspection, itemised defect report, photos
SOR: SDS-SDF-IAR-312
$50.61
Each
CCTV Drain Inspection
Camera inspection with video report
SOR: SDS-CCTV-INS
$285.00
Each
High Pressure Jetting
Per linear metre, clear blockages and build-up
SOR: SDS-JET-LM
$45.00
Linear Metre
Drain Repair Coupling
Repair cracked or broken drain section
SOR: SDS-SDF-RPL
$39.03
Each
Install Inspection Opening
100mm PVC DWV inspection point
SOR: SDS-SDF-SIN
$86.83
Each
Septic Pump Out
Full pump out, licensed waste removal
SOR: SDS-SPT-PMP
$875.33
Each
Pipe Repair Coupling 100mm
PVC repair coupling for cracked pipe
SOR: SDS-SDF-RPL
$39.03
Each
Copper Pipe 15–20mm Above Ground
Per linear metre, includes fittings, clips
SOR: GSS-COP-RPL-138
$31.38
Linear Metre
Copper Pipe Underground 15–20mm
Per linear metre, includes excavation, reinstatement
SOR: GSS-COP-RPL-139
$42.11
Linear Metre
Pipe Insulation
Per linear metre, foam lagging installed
SOR: PLB-PIP-INS
$18.00
Linear Metre
Isolating Valve
Install mini stop valve for isolation
SOR: PLB-ISO-SIN
$85.00
Each
Gas Leak Emergency Callout
Emergency attendance, leak detection, isolate
SOR: ERS-EGG-SER-124
$160.18
Each
Burst Pipe Emergency Response
Emergency attendance, isolate, temporary repair
SOR: PLB-EMG-BRS
$185.00
Each
Water Isolation + Make Safe
Isolate water supply, make area safe
SOR: PLB-EMG-ISO
$95.00
Each
Disconnect + Cap Off Service
Disconnect and cap off damaged gas or water pipe
SOR: GSS-COP-DAN-136
$70.63
Each
Drainage Inspect + Report
Full inspection, itemised defect report, photos
SOR: SDS-SDF-IAR-312
$50.61
Each
Gas Appliance Report
Inspect all gas appliances, BER report if needed
SOR: APP-GCT-IAR-2
$41.02
Each
Hot Water System Report
Full inspection, condition report, recommendations
SOR: HWS-INS-RPT
$45.00
Each
Full Plumbing Report
Comprehensive plumbing assessment, written report
SOR: PLB-INS-FUL
$220.00
Each
Pre-Purchase Plumbing Inspection
Full pre-purchase assessment, detailed written report
SOR: PLB-INS-PPR
$320.00
Each
Subtotal (ex GST)$0.00
GST (10%)$0.00
Total (inc GST)$0.00
Important: This is an estimate based on standard rates. Final price confirmed after site inspection.
Frequently Asked Questions
Yes — use the Emergency Items tab in the builder to see callout and emergency repair costs.
All prices are based on the NSW government Schedule of Rates, used across Greater Sydney.
Ready to book a repair?
Free video inspection — a licensed plumber assesses your issue remotely in minutes.
🔧 Like this tool? Get your free quote now
